< A >
ADP
MP2A (Mini PCI-E to PCI-E adapter)
Introduction:
The MP2A passive adapter is designed for desktop PCs that convert Mini-Card to USB port or standard PCI-Express 1x slot.
You can insert your USB type minicard to this adapter then plug to USB port through USB cable.
Or insert your PCI-E type mini-card into this adapter then insert to PCI-E 1x connector .
MP2A  |
Option IPX Cable 4pcs |
| MP2A with ANT2458Q5P (2.4/5.8GHz Rubber Duck Antenna)  |
|
| MP2A with ANT5800Q5P (5.8GHz 5dBi Rubber Duck Antenna)  |
MP2A with antenna 4 pcs |
|
|
 |
|
Features
- PCI Express Mini Card to PCI express 1x converter.
- Allows user to test PCI Express Mini modules on the PCI Express slot.
- Supports two primary system bus interface: PCI Express and USB.
- Supports all of Mini-Cards such as 3G,CDMA, WLAN,WWLAN, Mini Card to desktop PC.
- Supports U.FL/IPX to RP- SMA pigtail WiFi RF cable adapter. (Optional)
Notice
There are existing mPCIe 'form factor' SSD's that present SATA and PATA interface, but none that use the standard mPCIe pinout (i.e. mPCIe tx/rx pins). ...
MP2A support standard mPCIe minicard. Can’t support custom SATA/PATA SSD minicard.
Please check compatibility list for detail.
Specification
- PCI Express Mini Card to PCI Express/USB adapter.
- PCI Express Mini Card Electromechanical Specification Revision 1.2
- PCI Express Card Electromechanical Specification 1.1
- Universal Serial Bus Specification Revision 2.0
- Standard Height PCI Express Add-in Card.
- Low Profile PCI Express Add-in Card.
- Full/ Half -Mini Card dimension.
- SIM Connector for CDMA HSDPA/HSUPA, UMTS, GSM, GPRS, EDGE
- Wireless Disable/Enable switch
- WPAN, WLAN, WWAN, VCC3, VCC5, VCCaux LEDs
| MP2A Package Contents | ||
| Unit price: US$ 40 | ||
| MP2A (Mini PCI-E / PCI-E Adapter) x1 with IPX to RPSMA cable x3  |
IPX to RP-SMA cable |
|
U2AMTB60 (USB 2.0 A Male to B Mini 5 Pin Cable) x1 |
Y02-WH-015 (USB dupont 5PIN to dupont 5PIN cable) x1 |
|
JP0735 (Low profile PCI express bracket) x1 |
Screw x2 |
Gasket x4  |
option |
|||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|||||||||||||
|
|
||||||||||||
System Requirements
- PCI-Express 1x slot and USB port
- Windows 2000, XP, Vista 32/64,Windows 7
- Linux
MPxx products functions comparison |
MP1 |
MP2 |
MP2W |
MP2A |
Converts Mini-Card to USB port or standard PCI-Express 1x slot. |
√ |
√ |
√ |
√ |
Supports Standard Height PCI Express bracket |
√ |
√ |
√ |
√ |
Supports Low Profile PCI Express bracket |
|
√ |
|
√ |
Support Full-Mini Card dimension |
√ |
√ |
√ |
√ |
Support Half-Mini Card dimension |
|
√ |
√ |
√ |
Add u.FL/IPX to RP-SMA pigtail WiFi RF cable |
|
|
√ |
√ |
Add SIM card connector |
|
|
|
√ |
| Documents Download | |||
| Brief (PDF): | 
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| Dimension (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| Schematic (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| IPX cable brief (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| USB 2.0 cable selection (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| 900/1800MHz Antenna brief (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| 2.4GHz Antenna brief (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| 2.4 / 5.8GHz Antenna brief (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| 5.8GHz Antenna brief (PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| User manual(PDF): |
Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |
| Compatibility List(PDF): | Taiwan 1 |
Taiwan 2 Mirror |
China Mirror |