Introduction:
The USB 2380 is a PCI Express Gen 1 to USB 2.0 Hi-Speed Peripheral Controller. It features one PCI Express Gen 1 x1 port and one USB 2.0Hi-Speed client port. The USB 2380 provides a matching bandwidth at 2.5 GT/s between the PCI Express Gen 1 bus and the USB 2.0Hi-Speed bus. The controller can easily add a USB 2.0 client port to an existing PCI Express system, as well as convert an existing PCI Express function (endpoint) to a USB 2.0 product. The USB 2380 can configure the PCI Express port as one x1 upstream port or one x1 downstream port. The flexibility allows different system configurations to achieve the maximum performance of the product.

Specification

USB 2.0 Client Interface

• USB 2.0 Specification Compliant
• 1 upstream port
• Supports Hi-Speed, Full-Speed modes
• Four Descriptor-based DMA channels for automatic data transfers
• Supports USB Duet® Technology
• USB Auto-Enumeration Technology
• Support for Bulk, Isochronous, and Interrupt Endpoints
• USB 2.0 link power management states: L0, L1, L2
• Micro B Receptacle connector

PCI Express Interface

• PCI Express Gen 1 (2.5Gbps)
• Electrical Compliance to PCI Express Base Specification r2.0
• PCIe interface and integrated root complex provides two configurations:
  one x1 upstream port
• PCI Express Power Management
  All link power management states: L0, L0s, L1, L2/L3 Ready, and L3
  Device states: D0 and D3(hot & cold)
  Vaux, Wake#, Beacon support
• 256 byte maximum payload size
• ExpressCard 2.0 compliance
• Full-size MiniCard / mPCIe edge connector

USB2380-AB EVK application

USB2380EVB-PE3B application

Buy It Now

Note: We can not provide driver software and technical support, to get RDK and technical support services, Please contact PLX product sales representative or distributor. https://www.broadcom.com/products/pcie-switches-bridges/usb-pci/usb-controllers/usb2380#overview

OPTION